Brochure (PDF, 69k)The CM-232 communication module provides an RS-232 interface to almost any RS-232 enabled device.
It attaches to an RTI control system such as the RP-6 Remote Control Processor on one
end, and a device's DB-9 serial port connector on the other end. The CM-232 is capable of one-way
transmission (no receive function is supported) of user-defined character or binary strings. These character
strings, as well as the baud rate, parity, and bit structure are programmed using RTI's Integration
Designer software package.
Key Features
- Connects to the output ports of the RP-6
- Allows the RP-6 to send commands to almost any RS-232 enabled device
- Software-selectable baud rate up to 115.2K (depending on control system)
- Industry-standard DB-9 male connector
- No power supply required - Power is supplied by the output ports
- User-definable output strings using Integration Designer™ software
Specifications
| Baud Rate | Software Selectable (Depends on attached control system) |
| Cable Length | 12 Feet (3.7 m) |
| Connector | DB-9 Male |
| Pins Used | GND, TXD, DTR (tied high) |
| Dimensions (W x H x D) | 1.3" (33mm) x .5" (14mm) x 2" (51mm) |
| Warranty | One Year (Parts & Labor) |
* All specifications subject to change without notice.
